EGDE PROCESSING

Reduce the number of additional operations - we can perform them for you

Edge chamfering

Edge chamfering allows elements that are ready for welding to be delivered

As one of our services we offer the finishing of edges in accordance with specific requirements and specifications. We prepare edges for further operations such as welding, painting, assembly or simply for their aesthetics.

V chamfer (single)

Through the whole material thickness. This is one of the basic chamfers.

Y chamfer (single with a root face)

Through the whole material thickness. This is one of the basic chamfers.

V+Y chamfer (combined)

Consist of two overlapping V and Y chamfers

K chamfer (double)

It allows K groove welds to be made. Chamfering with the same angle, from the bottom and from the top.

K chamfer (double asymmetrical)

A chamfer for a K asymmetrical weld.

J chamfer

Allows smooth and precise welds to be made.

Angle from 15° to 60°

We can prepare the top or the bottom chamfer (or both of them) within the range from 15° to 60°

All materials

Welding preparation is required mainly for blackplates, stainless steel and aluminum. Our machines are able to chamfer virtually any material.

Radiuses from R2 to R5

We perform material edges radiuses within the range from R2 to R5

Up to 60 mm

We chamfer materials of a thickness of up to 60 mm

TOP